Standard Si Cell for Light Intensity Calibration (PEC-SI01)
This standard silicon cell has passed the ruled-based inspection, and the certification is attached to the cell. (The short circuit current measured under the illumination condition with the standard sun light spectrum)
● The inspection institute
4-8, Takakuramachi, Hachioji, Tokyo Bunkou keiki Co., Ltd.
● Example of a certification
Light source : 100mW/cm2 AM1.5G Class A
Temperature : 25 ºC Output current : 0.617 mA (S/N 453)
1.The standard silicon cell is a photo diode .Please use it for verification of a solar simulator.
2.Please only use it for measurement of short circuit current. The maximum limitation of current is 10 mA. Please avoid measuring a I-V curve.
3. Please avoid using under high temperature, high humidity and strong light. The capable operating temperature is between -20 to +60˚C. Please avoid outdoor usage.
4.If you need to correct proof for pseudo sunlight, please give official approval in the certification organization.
5.The electrical output of the cell is different from a spectral distribution of incident light. On this account, you cannot use it for correcting proof of light sources.
6.A quantum efficiency spectrum is available with charge if you need. A right spectrum is typical example of a EQE spectrum.