欢迎您访问国际能源网!
客服热线:400-8256-198 | 会员服务 | 广告服务 |

国际能源网能源商务通

能源行业最大的商务通平台
当前位置: 首页 » 供应 » 石油天然气行业 » 石油催化剂 » 助剂类 »
点击图片查看原图

日本防锖剂 气化性防锖剂 山一化学PART2防锖剂

  • 品牌:山一化学
  • 产地:日本
  • 颜色:透明
  • 容量:420ml
  • 单价:34.00元/非常
  • 起订:2 非常
  • 供货总量:445 非常
  • 发货期限:自买家付款之日起 2 天内发货
  • 所在地:浙江 衢州市
  • 有效期至:长期有效
  • 最后更新:2016-11-06 21:32
  • 浏览次数:5719
  • 公司基本资料信息

    产品详细说明

    型号:PARTⅡ
    类别:气化性防錆剂      
    容量:420ml
    规格;24支/箱
    Features: PART II
    1, PART 2 has superior heat resistance, and has nothing to do with the mold temperature, can play an anti rust effect (about 130 degrees C).
    2, high safety, do not contain nitrite dicyclohexyl ammonium nitrate and nitrite, almost no toxicity.
    3, greatly reduce the mold preparation time. 3 injections (colorless) or 7 pre injection (colored), all of the rust inhibitor. Does not seep from the ejector pin and the slide block, does not make the molding product to be stained with the oil pollution.
    4, two times to shorten the processing time, from the forming die first, 2 times of injection can be painted, printing, adhesive and two processing operations.
    5, there is no impact on the plastic, in case the product dip BarrierGuard, its impact is little, do not have to worry about the dissolution of cracks, etc..
    6, will not plug the pores. Even wrinkles, mirror processing of the mold, you can not clean, the effect is good; even for the injection molding of the mold, from the mold after the first injection will not be stained with oil.
    Note: This product is colored and colorless products are colored products on the surface of the mold has a layer of green marks;
    特点:
    1、PART 2具有优越的耐热性,与模具温度无关,可发挥防锈效果(约130℃)。
    2、安全性高,不含亚硝酸二环己基铵等亚硝酸盐和硝酸盐,几乎没有毒性。
    3、大幅度减少模具的准备时间。3次注射(无色)或7次预注射(有色),防锈剂全部气化。不会从喷射器销和滑块部位渗出,不会使成形品沾上油污。
    P2(1)
     
    0条 [查看全部]  相关评论
    搜索更多能源资讯